ZTE ZXHN H108N is ADSL/ADSL2+ Wi-Fi router based on Broadcom 6328.
Supported Versions
Router Screenshots for the ZTE ZXHN H108L. Firmware Upgrade for the ZTE ZXHN H108LRouter Sceenshot Back to the ZTE ZXHN H108L. © 2021 ZTE Corporation. All rights reserved.
| Brand | Model | Version | Current Release | Forum search | Forum Topic | Technical Data |
|---|---|---|---|---|---|---|
| ZTE | ZXHN H108N | v1 | 19.07.7 | https://forum.openwrt.org/viewtopic.php?id=42889 | View/Edit data |
Hardware Highlights
| Model | Version | SoC | CPU MHz | Flash MB | RAM MB | WLAN Hardware | WLAN2.4 | WLAN5.0 | 100M ports | Gbit ports | Modem | USB |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ZXHN H108N | v1 | Broadcom BCM63281 | 320 | 8 | 64 | Broadcom BCM43225 | b/g/n | - | 4 | - | ADSL2+ | 1x 2.0 |
Installation
Firmware downloads
| Model | Version | Current Release | Firmware OpenWrt Install | Firmware OpenWrt Upgrade | Firmware OEM Stock |
|---|---|---|---|---|---|
| ZXHN H108N | v1 | 19.07.7 | http://downloads.openwrt.org/releases/19.07.7/targets/brcm63xx/generic/openwrt-19.07.7-brcm63xx-generic-96328avng-generic-squashfs-cfe-8M.bin |
Installation via CFE web recovery
- Turn off modem.
- Press “reset” and keeping it pressed, turn on the router.
- Browse to “192.168.1.1”, you should see this screen:
- Select the previously downloaded image and press “upgrade”.
- Power led will flash from green to red (aprox 2 minutes) and finally stays orange.
It seems that there are 2 different models identified as H108N, one based on Broadcom 6328 and the other on Realtek RTL8672 (unsupportable). OpenWrt is only valid for the model based on Broadcom 6328. Instructions to know our chipset without opening the router:
telnet 192.168.1.1
If the result is this, you can not install OpenWrt on the router.
Tested Versions
| Version/Model | Launch Date | S/N | OpenWrt Version Supported | Model Specific Notes |
|---|---|---|---|---|
| AZRFC V1.0 | - | - | CHAOS CALMER (15.05.1, r48532) | - |
Hardware
Info
| Architecture | MIPS |
|---|---|
| Vendor | Broadcom |
| bootloader | CFE |
| System-On-Chip | Broadcom BCM63281 KFBG |
| CPU/Speed | 320MHz |
| Flash-Chip | Macronix MX25L6406E 8MiB) |
| RAM | Nanya Technology Corporation NT5TU32M16DG-AC (64MiB) |
| Wireless | Broadcom BCM43225 2.4GHz 802.11bgn |
| Ethernet | switch integrated in-SoC, 4x fast ethernet |
| Internet | ADSL/ADSL2+ |
| USB | 1 x 2.0 |
| Serial | ? |
| JTAG | ? |
Photos
Model Number
Front:
Photo of front of the casing
Back:
Photo of back of the casing
Main PCB
Photo of PCB
Serial
→ port.serial general information about the serial port, serial port cable, etc.
Serial Port rs232-TTL 3v3.
baudrate 115200
Serial log:
Photo of PCB with markings
Zxhn H108n V2.3 Firmware Version 10.0 Free
JTAG
→ port.jtag general information about the JTAG port, JTAG cable, etc.
How to connect to the JTAG Port of this specific device:
Photo of PCB with markings
Debricking
Notes
upgrade page could be browsing 192.168.1.254 instead 192.168.1.1